Le signal entre. La télévision sort.

La tête de réseau TV complète. D'abord un logiciel.

Recevez HLS, SRT et RTMP. Diffusez du MPEG-TS multicast vers les décodeurs, ou du DVB-C sur le câble coaxial déjà présent dans les murs. Installez-le sur un serveur Linux que vous possédez déjà — ou achetez-le prêt à brancher sur l'un de nos boîtiers sans ventilateur.

100chaînes par appareil
1.9schangement de chaîne
<15Wsans ventilateur, aucune pièce mobile
€0avec un bouquet tvheadend.io

Ce qu’il fait

Tout le chemin du signal, de bout en bout.

Castmux se place entre les contenus que vous achetez et les prises que vous avez déjà.

Signals arrive from satellite, from the internet as HLS, SRT or RTMP, or from a local camera or encoder. Castmux receives them, prepares the transport stream, and delivers them to the building as UDP multicast over the LAN, or as DVB-C on the existing coaxial cable.
Tout le système. Un processus sur une machine — la vôtre ou la nôtre.

Comment ça marche ?

Un processus, une page web.

Pas de serveur d'ingestion, de multiplexeur, d'outil de modulation ni de pile de supervision séparés.

📥

Réception des contenus

  • HLS, with the quality rung you choose
  • SRT, with latency set from measured RTT
  • RTMP from a local encoder
  • Satellite, via a DVB-S/S2 receiver feeding IP or SRT
  • prévu UDP/RTP, RTSP, direct DVB tuners
📤

Diffusion des contenus

  • MPEG-TS over UDP multicast or unicast
  • DVB-C multiplexes on TBS modulators
  • Original PIDs, every audio language
  • Subtitles and teletext passed through
📊

Maintien à l'antenne

  • Bitrate measured off the wire, not reported
  • Live viewer counts per channel
  • Only streams what somebody is watching
  • Says when the network is the fault

The software

One web page runs the whole headend.

Add a channel, watch it in the browser, and see what is actually leaving the network port. No command line, no configuration files to hand-edit.

Channel management screen: one card per channel with source, destination, live bitrate, uptime and viewer count.
Channels — source, destination, live bitrate, viewers and logs on one card.
DVB-C screen: multiplexes shown by frequency, with channels dragged and dropped between them.
DVB-C — drag channels between frequencies, with live capacity per multiplex.

Take a tour of the interface →

Matériel

Ou achetez-le prêt à brancher.

Le logiciel est le produit. Si vous préférez ne pas assembler de machine, nous le livrons préinstallé sur deux boîtiers sans ventilateur.

IPTV / HDMI Box, front and rear: USB 3.0, status LEDs, micro-SD, dual 2.5G LAN, HDMI and USB-C power.
CompactCost-efficientPlug & play

IPTV / HDMI Box

Connects to HLS, SRT and RTMP sources and converts them to IPTV multicast output on the local network.

  • ChannelsUp to 15
  • OutputUDP multicast
  • NetworkDual 2.5G LAN
  • PortsUSB 3.0 · micro-SD
€150 par boîtierLicence incluse avec les signaux
Détails
Cable TV / IPTV Pro Box, front and rear: RF coaxial connectors, USB ports and audio jack.
Hybrid IP & RFHeadend integration

Cable TV / IPTV Pro Box

Connects to SRT and HLS channels and outputs them via a DVB-C modulator onto the existing coaxial network. Use it as the only source, or route existing channels through it.

  • ChannelsUp to 100
  • OutputDVB-C · UDP multicast
  • Multiplexes16 frequencies
  • AssignmentDrag and drop
€1,899 par appareilLicence incluse avec les signaux
Détails

Projet frère · tvheadend.io

Besoin des chaînes aussi ?

A headend is only as good as what you put through it. Our channel backbone delivers over 2,000 licensed television and radio services over HLS and SRT — national, international and multi-language — ready to point Castmux at.

Avec un bouquet de chaînes, la licence Castmux est gratuite.

2,000+

services TV et radio sous licence

HLS · SRTdiffusion
Multi-languagepistes audio
EU-licenseddroits inclus

Tarifs

Par appareil. Pas par chaîne, par chambre ou par spectateur.

Et rien du tout si les chaînes viennent de chez nous.

Software only

You already have your own signal sources.

€22/ month

Or €220 per year — two months free.

  • Every feature. Same build.
  • Unlimited channels, up to the appliance capacity
  • Updates and support included
  • Cancel any time
  • Runs on your hardware or ours
Détails

Le même prix que l'acteur établi, et gratuit si vous achetez votre signal chez nous. Conditions complètes et tarifs multi-sites.

Autres fonctions

Ce dont vous découvrez avoir besoin.

  • Web interface — configure everything in a browser, light or dark
  • On-demand streaming — run only the channels being watched
  • Resolution profiles — ask for SD and get SD
  • Route diagnosis — tells you when multicast is going nowhere
  • Browser preview — watch any channel from your desk
  • OpenTelemetry metrics — into the dashboard you already run
  • HTTP API — drive it from your own middleware
  • Runs offline — no cloud service needed to stay on air
  • arm64 and x86 — fanless, diskless, silent

Comparer fonction par fonction avec Cesbo Astra →

Voyez-le tourner sur vos propres flux.

Vingt minutes en partage d'écran. Apportez une URL de flux et nous la diffusons sur un groupe multicast pendant que vous regardez. Si cela ne vous convient pas, nous vous le dirons pendant l'appel.