Entra la señal. Sale la televisión.

La cabecera de TV completa. Primero software.

Reciba HLS, SRT y RTMP. Entregue MPEG-TS multicast a los descodificadores, o DVB-C por el cable coaxial que ya está en las paredes. Instálelo en un servidor Linux que ya tenga — o cómprelo listo para conectar en una de nuestras cajas sin ventilador.

100canales por equipo
1.9scambio de canal
<15Wsin ventilador, sin piezas móviles
€0con un paquete de canales de tvheadend.io

Qué hace

Todo el recorrido de la señal, de principio a fin.

Castmux se sitúa entre el contenido que compra y las tomas que ya tiene.

Signals arrive from satellite, from the internet as HLS, SRT or RTMP, or from a local camera or encoder. Castmux receives them, prepares the transport stream, and delivers them to the building as UDP multicast over the LAN, or as DVB-C on the existing coaxial cable.
Todo el sistema. Un proceso en una máquina — la suya o la nuestra.

¿Cómo funciona?

Un proceso, una página web.

Sin servidor de ingesta, multiplexor, herramienta de modulación ni pila de monitorización aparte.

📥

Recepción de contenido

  • HLS, with the quality rung you choose
  • SRT, with latency set from measured RTT
  • RTMP from a local encoder
  • Satellite, via a DVB-S/S2 receiver feeding IP or SRT
  • previsto UDP/RTP, RTSP, direct DVB tuners
📤

Entrega de contenido

  • MPEG-TS over UDP multicast or unicast
  • DVB-C multiplexes on TBS modulators
  • Original PIDs, every audio language
  • Subtitles and teletext passed through
📊

Mantenerlo en el aire

  • Bitrate measured off the wire, not reported
  • Live viewer counts per channel
  • Only streams what somebody is watching
  • Says when the network is the fault

The software

One web page runs the whole headend.

Add a channel, watch it in the browser, and see what is actually leaving the network port. No command line, no configuration files to hand-edit.

Channel management screen: one card per channel with source, destination, live bitrate, uptime and viewer count.
Channels — source, destination, live bitrate, viewers and logs on one card.
DVB-C screen: multiplexes shown by frequency, with channels dragged and dropped between them.
DVB-C — drag channels between frequencies, with live capacity per multiplex.

Take a tour of the interface →

Hardware

O cómprelo listo para conectar.

El software es el producto. Si prefiere no montar una máquina, lo entregamos preinstalado en dos cajas sin ventilador.

IPTV / HDMI Box, front and rear: USB 3.0, status LEDs, micro-SD, dual 2.5G LAN, HDMI and USB-C power.
CompactCost-efficientPlug & play

IPTV / HDMI Box

Connects to HLS, SRT and RTMP sources and converts them to IPTV multicast output on the local network.

  • ChannelsUp to 15
  • OutputUDP multicast
  • NetworkDual 2.5G LAN
  • PortsUSB 3.0 · micro-SD
€150 por cajaLicencia incluida con las señales
Detalles
Cable TV / IPTV Pro Box, front and rear: RF coaxial connectors, USB ports and audio jack.
Hybrid IP & RFHeadend integration

Cable TV / IPTV Pro Box

Connects to SRT and HLS channels and outputs them via a DVB-C modulator onto the existing coaxial network. Use it as the only source, or route existing channels through it.

  • ChannelsUp to 100
  • OutputDVB-C · UDP multicast
  • Multiplexes16 frequencies
  • AssignmentDrag and drop
€1,899 por equipoLicencia incluida con las señales
Detalles

Proyecto hermano · tvheadend.io

¿Necesita también los canales?

A headend is only as good as what you put through it. Our channel backbone delivers over 2,000 licensed television and radio services over HLS and SRT — national, international and multi-language — ready to point Castmux at.

Con un paquete de canales, la licencia de Castmux no cuesta nada.

2,000+

servicios de TV y radio con licencia

HLS · SRTentrega
Multi-languagepistas de audio
EU-licensedderechos incluidos

Precios

Por equipo. No por canal, por habitación ni por espectador.

Y nada en absoluto si los canales vienen de nosotros.

Software only

You already have your own signal sources.

€22/ month

Or €220 per year — two months free.

  • Every feature. Same build.
  • Unlimited channels, up to the appliance capacity
  • Updates and support included
  • Cancel any time
  • Runs on your hardware or ours
Detalles

El mismo precio que el líder establecido, y gratis si compra la señal con nosotros. Condiciones completas y tarifas para varios emplazamientos.

Otras funciones

Las cosas que descubre que necesitaba.

  • Web interface — configure everything in a browser, light or dark
  • On-demand streaming — run only the channels being watched
  • Resolution profiles — ask for SD and get SD
  • Route diagnosis — tells you when multicast is going nowhere
  • Browser preview — watch any channel from your desk
  • OpenTelemetry metrics — into the dashboard you already run
  • HTTP API — drive it from your own middleware
  • Runs offline — no cloud service needed to stay on air
  • arm64 and x86 — fanless, diskless, silent

Comparar función por función con Cesbo Astra →

Véalo funcionando con sus propias señales.

Veinte minutos compartiendo pantalla. Traiga una URL de flujo y la pondremos en un grupo multicast mientras usted mira. Si no le encaja, se lo diremos en la llamada.